Specifying settings for running Kiosk

If you want Kiosk to start automatically when the nControl boots up, you must specify a project name (and optionally, a user name and password). These settings will then be used automatically.

A project name is also required if you want to start Kiosk manually by exiting the main set up screen in the Windows interface. If you specify the project using the Windows interface, the Exit button will be available immediately. If you use the web interface, you must firstly display the project settings in the Windows interface, then select Exit to refresh the display.

To specify Kiosk settings to use automatically

1. On the main set up screen, select the Enable NWare Kiosk check box.
2. Click Project.

   

3. Click Edit Project.
4. Type the name of the NWare project, and then click OK.

   If you do not specify a valid project, the user will be prompted to choose a project when the unit powers up.

   Note: The project name is case-sensitive.

5. Click Edit User.
6. Type the username for the project, and then click OK.

   Note: The username is case-sensitive.

7. Click Edit Password.
8. Type the password for the project, and then click OK.

   Note: The password is case-sensitive.

9. Click Exit.