|
|
|
Control Wiring |
Enable master wiring mode |
When this control is wired to a slave control, the slave will track this control as it is gestured. |
Enable peer wiring mode |
When this control is wired to another peer control, the controls will track each other as they are gestured. |
|
Enable slave wiring mode |
When this control is wired to a master control it will track the value of the master control as it is gestured. |
|
Control Alias |
The name to use when referring to the control from an external protocol, like RATC or PASHA. If you are editing a control inside a Kiosk2Go block, the alias will be specified automatically. Note: When you specify an alias, NWare will check to see if that alias is already in use by another control. If it is, a warning will be displayed. If you click Yes, the control alias will be moved over from the old control to the new control. If you click No, the alias will not be moved. If you want to control multiple controls using the same alias, assign the alias to one of the controls and then use control wiring to connect them together in the project. |
|
|
See also |