VCAT-HD-R front and rear

1. IR internal receiver.
2. ON: Blinks green when the receiver is working correctly.
3. LINK: Twisted pair link status indicator. On when the connection is successful.
4. OUT: Solid when the display supports HDCP and the key is passed; Blinks when the display does not support HDCP.
5. POWER: Lit (red) when the external power supply is connected properly.

   

6. TP IN: Accepts a single data cable for connection to TP OUT port of VCAT-HD-T.
7. HDMI OUT Connector for an HDMI monitor.
8. IR IN: Connector for IR receiver.
9. IR OUT: Connector for IR transmitter.

   Notes:

   • If you want to use the IR IN and IR OUT ports on one of the VCAT-HD devices, you must also use these ports on the other VCAT-HD device.
   • When the IR IN and IR OUT ports are connected, the internal IR sensors (labeled IR on the front of each device) are disabled.

10. RS232: Serial connector for bi-directional pass-thru communications.
11. 5V DC: External power supply connector.