|
|
|
Peak Digital Input Meters |
Peak digital input level in dB (23 dB equals full-scale digital input). |
Analog Clip |
Lit (red) when the input signal is clipped. This occurs when the signal level exceeds the maximum analog sine input level plus 3dB. |
Maximum Analog Sine Input Level |
The maximum expected analog RMS input level for the channel. The peak level is 3dB higher. This control scales the analog input section before the signal is passed to the analog to digital converter. Use it to adjust the sensitivity of the input stage so that the meter display moves across its full range and not just in a small area. The range is dependent on the type of card you are using. |
Mute |
Mutes the channel. |
Invert |
Inverts the polarity of the signal. |
|
Solo. Specifies that the channel is to remain open while all others are muted. Any other channel with Solo on will also remain open. |
Digital Gain |
The level of gain to be applied to digital signal inside the unit. The signal has already been converted from analog to digital by the A/D converter. The range is to -100dB to 18dB. |
|
See also |
