Setting the backlight level

  1. Press the Zone Up button or Zone Down button repeatedly until the Set Backlight Level screen is displayed.
  2. Press Level Up or Level Down to change the backlight value.

    The valid range is 0 (dim) to 9 (bright).

  3. Press the Zone Up button or Zone Down button repeatedly until the Save and Exit screen is displayed.
  4. Select Save and Exit.
  5. Press Enter.

See also

Introduction

Displaying the setup menu

Setting the unit base code

Setting the inactivity timer

Setting the logout timer

Adding or deleting a user passcode

Displaying the firmware version and copyright information

Logging off and returning to the logo screen