Setting the logout timer

The logout timer automatically logs the user out of the setup screens after a specified time has elapsed since a button was pressed.

To set the logout timer

  1. Press the Zone Up button or Zone Down button repeatedly until the Set Logout Timer screen is displayed.
  2. Press the Source buttons to select a digit, then press Level Up or Level Down to change its value.
  3. Press Enter.

    The valid range is 0-99 seconds.

  4. Press the Zone Up button or Zone Down button repeatedly until the Save and Exit screen is displayed.
  5. Select Save and Exit.
  6. Press Enter.

See also

Introduction

Displaying the setup menu

Setting the unit base code

Setting the inactivity timer

Adding or deleting a user passcode

Setting the backlight level

Displaying the firmware version and copyright information

Logging off and returning to the logo screen