Controls

Media Player

File Name

If you want to play a file imported into the project via the Media tab, specify the file name only. If you do not include the file extension, it will be assumed to be .wav.

If you want to play a file stored on the remote node, specify the path and file name of the media file. Here is the format:

ftp/<path>/my_file

Note: The project must be deployed before you specify the file name.

Stop playback.

Start playback.

Repeat playback of the track.

The LED above the button will flash on and off each time the track repeats.

Tip: You can use the LED to control logic in your design. For example, you could count the number of repeats or initiate other logic operations each time the track repeats.

Mutes the audio output.

Gain. Sets the amount of amplification or attenuation to be applied to the signal.

Error

Error messages indicating problems that have occurred when recording or playing back audio files.

If an error is displayed and you are using an nControl node, check that the nControl node has an AudioScience card installed; if you are playing a file stored on the node, connect to it via FTP and check that the file you are referencing exists.

Card

The adapter number of the AudioScience card.

Each card shipped from Peavey has an adapter number of 1, which is set using a jumper on the card. If you want to fit more than one AudioScience card to an nControl, you must specify a unique adapter number for each card.

For more information, see Installing multiple Audio Science cards in the nControl Hardware Manual.

Chan

The audio channel number used for playback or recording.