|
|
|
Asymmetric/symmetric |
When enabled, sets the equalizer's attenuation response to asymmetric (i.e. the attenuation response will be narrower than the amplification response). Therefore, when disabled, it will act as a graphic equalizer, which has a symmetric frequency response. |
Type |
Sets the type of frequency response. Choose between Parametric, Low Shelf, and High Shelf. |
Bandwidth |
Sets the equalizer's frequency range, measured in octaves. For instance, a Bandwidth setting of "1" results in a filter response with 3dB down points, 1 octave apart. |
Center frequency |
Sets the center of the affected frequencies. |
Gain |
Sets the amount of attenuation or amplification to be applied at the center frequency. |
Bypass |
Device Bypass: when activated, routes the input signal directly to the output at 0dB. Channel Bypass: when activated, routes the input signal directly to the output for one band of the equalizer at 0dB. |
|
See also |