Installing the VCAT-HD devices

1. Connect one end of an HDMI cable to an HDMI video source (such as a Blu-ray DVD player), then connect the other end to the HDMI IN port of the VCAT-HD-T.
2. Connect one end of a CAT-5e or CAT-6 cable to the TP OUT port of the VCAT-HD-T, then connect the other end to the TP IN port of the VCAT-HD-R.
3. Connect one end of an HDMI cable to a video monitor, then connect the other end to the HDMI OUT port of the VCAT-HD-R.
4. Connect the DC 5V power cables to both the VCAT-HD-T and VCAT-HD-R.
5. If you want to use the IR IN and IR OUT ports for infrared communications, rather than the internal IR sensors (labeled IR on the front of each device), connect the external devices to the IR IN and IR OUT ports on the VCAT-HD-T and VCAT-HD-R.

   Notes:

   • If you want to use the IR IN and IR OUT ports on one of the VCAT-HD devices, you must also use these ports on the other VCAT-HD device.
   • When the IR IN and IR OUT ports are connected, the internal IR sensors (labeled IR on the front of each device) are disabled.