Controls

IP address

The IP address of the device you want to contact. This value can be edited.

Link

Lit (green) when a link is established between NWare and the device across the network.

Bundle

The bundle number that the nWall will use to transmit or receive audio via the CobraNet network.

Each bundle can manage between 1 and 8 channels. The range is 0 to 65,535 (0 is off). For multicast bundles, the number must be in the range 1 to 255. For unicast bundles, the number must be in the range 256 to 65,279. Numbers in the range 65280 to 65535 are reserved and cannot be used.

For an nWall 0.2, the bundle will contain two output channels:

• The line output for the first XLR connector and first mini-jack.
• The line output for the second XLR connector and second mini-jack.

For an nWall 1.1, two bundle numbers are used. When the device is transmitting audio onto the network, the two channels inside the transmitter bundle contain two separate audio streams:

• audio from the mini-jack on channel 1.
• audio from the XLR connector on channel 2.

When the device is receiving audio from the network, the two channels of audio inside the receiver bundle are used as follows:

• The mini-jack receives audio from channel 1.
• The XLR connector receives audio from channel 2.

For an nWall 2.0, the bundle will contain two input channels:

• The mic input from the first XLR connector summed with the line input from the first mini-jack.
• The mic input from the second XLR connector summed with the line input from the second mini-jack.

Transmitting

Lit (green) when the nWall is transmitting audio data onto the CobraNet network, and another device is receiving the audio stream.

Receiving

Lit (green) when the nWall is receiving audio data from the CobraNet network.