Controls

Signal meter

Shows a graphical representation of the incoming signal strength.

It is divided into color segments:

• Green indicates that the input level is below the nominal +0dB.
• Yellow indicates that the signal is reaching the headroom provided between +0dB and +20dB.
• Red indicates that the level is above +20dB.

Red bars (hold indicators)

Show the highest recent signal levels shown on the meter. The hold indicators are displayed for a set period of time – the hold time.

RMS Response Time

The length of time over which to sample the RMS signal value and derive an average for display on the RMS signal meter.

Peak Decay Time

The length of time to display the last reading of the peak signal meter before it displays to a lower reading.

Hold Time

The length of time to display the peak and RMS hold indicators in their last positions before they are updated.

Infinite Hold

When clicked, the hold indicators on the level meters will continually show the maximum signal value.