|
|
|
File Name |
If you want to play a file imported into the project via the Media tab, specify the file name only. If you do not include the file extension, it will be assumed to be .wav. If you want to play a file stored on the remote node, specify the path and file name of the media file. Here is the format: ftp/<path>/my_file Note: The project must be deployed before you specify the file name. |
|
Stop playback. |
|
Start playback. |
|
Pause playback. |
|
Repeat playback of the track. The LED above the button will flash on and off each time the track repeats. Tip: You can use the LED to control logic in your design. For example, you could count the number of repeats or initiate other logic operations each time the track repeats. |
|
Mutes the audio output. |
|
Inverts the polarity of the signal. |
|
Gain. Sets the amount of amplification or attenuation to be applied to the signal. |
Error |
Error messages indicating problems that have occurred when recording or playing back audio files. If an error is displayed and you are using an nControl node, check that the nControl node has an AudioScience card installed; if you are playing a file stored on the node, connect to it via FTP and check that the file you are referencing exists. |
|
See also |
