1 Topic by Yuriy

  • Yuriy
  • Member
  • Offline
  • From: Kiev, Ukraine
  • Registered: 2012-03-30
  • Posts: 4

Topic: Problem with the output cards Nion Nx

Рroblem with the output cards Nion Nx

Configuration.
Nion Nx CobraNet
slot1 - 8o
slot2 - 8o
slot3 - 8o
slot4 - 8i

Cab4n
slot C output
slot D input

On the first input card, slot4 - 8i, line-level signal is applied.
In the DSP signal is distributed to all outputs Nion Nx slot1 - 8o / slot2 -  8o / slot3 - 8o, and through CobraNet Cab4n slot C output.

With NWare can see the signal levels, which goes to all outputs Nion Nx sslot1 - 8o / slot2 -  8o / slot3 - 8o.
The reality is that the speakers are connected to these outputs are silent.
lcd Screen shows that the input and output signals are present, but really there is no signal at the output.

At the same time CobraNet Cab4n slot C output is functioning properly.
Acoustic systems are play sound.

What  could  be  wrong  with  the output Nion Nx slot1 - 8o / slot2 - 8o / slot3 - 8o?

Last edited by Yuriy (2012-04-02 11:59:45)

Yuriy's Website

2 Reply by James Kennedy

  • James Kennedy
  • James Kennedy
  • Operations Manager - EMEA
  • Offline
  • From: Peavey - Corby
  • Registered: 2007-09-03
  • Posts: 63

Re: Problem with the output cards Nion Nx

Hi Yuriy,

Oleg has sent me the detail on this issue, I will be looking into it tomorrow (Wednesday 4th April).

Thanks,

James

All energy flows according to the whims of the Great Magnet. What a fool I was to defy him.

3 Reply by Yuriy

  • Yuriy
  • Member
  • Offline
  • From: Kiev, Ukraine
  • Registered: 2012-03-30
  • Posts: 4

Re: Problem with the output cards Nion Nx

Hi James,

We reinstall input and output expansion card.
slot 1 - 8o
slot 2 - 8o
slot 3 - 8o
slot 4 - 8i

Output cards are also not functioning.
CobraNet and Cab4n working properly.
NionNx self-test passes without errors.
In this case, we used software NWare 1.6.4

5th Thursday, I will install and test the system using NWare 1.6.3

Yuriy's Website

4 Reply by Yuriy

  • Yuriy
  • Member
  • Offline
  • From: Kiev, Ukraine
  • Registered: 2012-03-30
  • Posts: 4

Re: Problem with the output cards Nion Nx

Hi James,

Testing the output card is successful. All outputs are functioning.
I will look for an error in my project.

I found the reason why not work output expansion card, in the NION nX CobraNet.
If NION nX works with CobraNet, then output expansion card is not functioning normally.
If NION nX works without the network CobraNet, output expansion card is functioning normally.

In looking for is, I could not configure the simultaneous operation of output expansion card, and CobraNet.

Thanks for your help.

Yuriy's Website