1 Topic by JoshM

  • JoshM
  • JoshM
  • Recording Engineer at Burnt Orange Studio
  • Offline
  • From: Meridian, MS
  • Registered: 2007-08-13
  • Posts: 1,498

Topic: -NWare 1.6.4- Now Available!

NWare 1.6.4 has been officially released.

You can download the complete NWare suite here:
http://mm.peavey.com/assets/software/NW … -4_782.msi

Or, if you just need NWare:Kiosk, it can be found here:
http://mm.peavey.com/assets/software/NW … sk_781.msi

But, whatever you do, be certain to download and read the release notes for this version
-You can find the release notes in the Knowledge Center here:
http://www.peaveyoxford.com/kc/index.htm#5968
-Or, they can be found here in PDF form:
http://www.peaveyoxford.com/kc/NWare%20 … 0Notes.pdf

All current and previous versions of NWare can be found here:
http://mm.peavey.com/downloads/index.cf … ;cat_id=69

Please let me know if you have any issues.

Thanks and have fun!

Josh Millward
Burnt Orange Studios

JoshM's Website

2 Reply by phils

  • phils
  • Member
  • Offline
  • From: Sydney, Australia
  • Registered: 2007-08-15
  • Posts: 322

Re: -NWare 1.6.4- Now Available!

Thanks Josh!!

"The single biggest problem in communication is the illusion that it has taken place."
                                                                                        - George Bernard Shaw

3 Reply by Yuriy

  • Yuriy
  • Member
  • Offline
  • From: Kiev, Ukraine
  • Registered: 2012-03-30
  • Posts: 4

Re: -NWare 1.6.4- Now Available!

I program the first time, with NionNx CobraNet
Can I use the version NWare 1.6.4?

Yuriy's Website

4 Reply by JoshM

  • JoshM
  • JoshM
  • Recording Engineer at Burnt Orange Studio
  • Offline
  • From: Meridian, MS
  • Registered: 2007-08-13
  • Posts: 1,498

Re: -NWare 1.6.4- Now Available!

Hi Yuri!

Welcome to the forum!

Yes, all NION processors are able to use any version of NWare. However, it is important that you update the NION firmware so that your computer and the NION are using the same version. Likewise, any Kiosk clients on the network also need to be using the same version as the NIONs / nControl / nTouch 180s that are also on the network.

It is easy to update the firmware on the NION once your computer and the NION are co-existing on the same subnet and can see one another. Select "Tools" then select "Update target firmware" and you will get a window that shows all the devices on the network and what versions of firmware they are running. You can select the devices (by clicking on them and choosing "Select for update") to be updated to the version of firmware that is being shown in the "Available Firmware" combo box below. Then hit "Update" It does take a few minutes and the NION will restart to complete the update procedure.

Thanks!
Josh

Josh Millward
Burnt Orange Studios

JoshM's Website

5 Reply by kaisar15

  • kaisar15
  • Member
  • Offline
  • Registered: 2012-09-18
  • Posts: 1

Re: -NWare 1.6.4- Now Available!

Hello...
Can I use the version of NWare 1.6.4 with NionNX Cobra-net?

6 Reply by JoshM

  • JoshM
  • JoshM
  • Recording Engineer at Burnt Orange Studio
  • Offline
  • From: Meridian, MS
  • Registered: 2007-08-13
  • Posts: 1,498

Re: -NWare 1.6.4- Now Available!

kaisar15 wrote:

Hello...
Can I use the version of NWare 1.6.4 with NionNX Cobra-net?

Hi kaisar15!

Welcome to the forum!

As I wrote above:
Yes, all NION processors are able to use any version of NWare. However, it is important that you update the NION firmware so that your computer and the NION are using the same version. Likewise, any Kiosk clients on the network also need to be using the same version as the NIONs / nControl / nTouch 180s that are also on the network.

It is easy to update the firmware on the NION once your computer and the NION are co-existing on the same subnet and can see one another. Select "Tools" then select "Update target firmware" and you will get a window that shows all the devices on the network and what versions of firmware they are running. You can select the devices (by clicking on them and choosing "Select for update") to be updated to the version of firmware that is being shown in the "Available Firmware" combo box below. Then hit "Update" It does take a few minutes and the NION will restart to complete the update procedure.

Thanks!
Josh

Josh Millward
Burnt Orange Studios

JoshM's Website