1 Topic by JoshM

  • JoshM
  • JoshM
  • Recording Engineer at Burnt Orange Studio
  • Offline
  • From: Meridian, MS
  • Registered: 2007-08-13
  • Posts: 1,498

Topic: NWare 1.5.3a officially released

NWare 1.5.3a has been officially released.

You can download the complete NWare suite here:
http://mm.peavey.com/assets/software/NW … 3a_629.msi

Or, if you just need NWare:Kiosk, it can be found here:
http://mm.peavey.com/assets/software/NW … sk_628.msi

But, whatever you do, be certain to download and read the release notes for this version. They can be found here
http://www.peaveyoxford.com/kc/10223.htm  <- for the 1.5.3 release
http://www.peaveyoxford.com/Documentati … _1.5.3.htm  <- the addendum for the 1.5.3a release
and in PDF form:
http://mm.peavey.com/assets/tech_notes/ … es_602.pdf  <- for the 1.5.3 release
http://mm.peavey.com/assets/tech_notes/ … es_630.pdf  <- the addendum for the 1.5.3a release


If you are interested in all of the release notes from all previous versions of NWare, they can be found here:
http://www.peaveyoxford.com/kc/NWare%20 … 0Notes.pdf (does NOT include 1.5.3a)

The Knowledge Base has been updated to reflect this release.

Please let me know if you have any issues.

Thanks and have fun!

Josh Millward
Burnt Orange Studios

JoshM's Website

2 Reply by Fergy

  • Fergy
  • MM Tech Support
  • Offline
  • From: The Home Office--Meridian
  • Registered: 2007-08-15
  • Posts: 334

Re: NWare 1.5.3a officially released

When moving from an earlier version of NWare to 1.5.3a and you do an "Update All Out of Date Devices", the XDAB will be updated to the new XDAB (limited in size to 448).  The replaced XDAB will now be the default size of 8.  You will need to go and resize the XDAB back up to the needed size for your project.

Make it intuitive, never leave them guessing.

3 Reply by ivorr

  • ivorr
  • ivorr
  • DSP Geek
  • Offline
  • From: West Des Moines, IA
  • Registered: 2007-08-17
  • Posts: 56

Re: NWare 1.5.3a officially released

Issue: If you are running Windows7, you may be unable to update the NION firmware.

Resolution: Right-click on the NWare icon > Properties > Compatibility > Check the box marked "Run this program in compatibility for" and select Vista SP1.

The only true wisdom is in knowing you know nothing. -Socrates

ivorr's Website