1 Topic by Matt-H

  • Matt-H
  • Member
  • Offline
  • Registered: 2007-11-17
  • Posts: 10

Topic: Panda remote links in Ncontrol

James is already helping me out with this, but I though I would post to you all to try and help us along.

In Nware you can make Panda see across Subnets by adding the remote location to the pandad.cfg.xml file. Now I need to do the same but for an Ncontrol instead of Nware.

This is to allow Project Link Clients on a central Ncontrol to see Project Link Servers in muliple venues with their own standalone deployments of Nion on their own vlans, I was thinking I could use the Subnet Bridge Blocks in Ncontrol but this doesn't seem to work. My network is working correctly, with the modified pandad.cfg.xml on my PC, Nware can see the others venues and I can emulate my central control file and all works OK. but when deployed to the Ncontrol the Project links can not be established.

Any ideas

Thank you

Matt

2 Reply by Matt-H

  • Matt-H
  • Member
  • Offline
  • Registered: 2007-11-17
  • Posts: 10

Re: Panda remote links in Ncontrol

I found today I could use one Media Matrix Subnet Bridge block in Ncontrol to see one of the remote venues, as soon as I added a second bridge the first stopped working.