1 Topic by JoshM

  • JoshM
  • JoshM
  • Recording Engineer at Burnt Orange Studio
  • Offline
  • From: Meridian, MS
  • Registered: 2007-08-13
  • Posts: 1,498

Topic: NWare 1.5.1 officially released

NWare 1.5.1 has been officially released.

You can download the complete NWare suite here:
http://mm.peavey.com/assets/software/NW … -1_520.msi

Or, if you just need NWare:Kiosk, it can be found here:
http://mm.peavey.com/assets/software/NW … sk_523.msi

But, whatever you do, be certain to download and read the release notes. They can be found here (in PDF form):
http://mm.peavey.com/assets/tech_notes/ … es_522.pdf

Josh Millward
Burnt Orange Studios

JoshM's Website

2 Reply by phils

  • phils
  • Member
  • Offline
  • From: Sydney, Australia
  • Registered: 2007-08-15
  • Posts: 322

Re: NWare 1.5.1 officially released

Thanks for the good news.
When do you expect the kc will be updated?

"The single biggest problem in communication is the illusion that it has taken place."
                                                                                        - George Bernard Shaw

3 Reply by Fergy

  • Fergy
  • MM Tech Support
  • Offline
  • From: The Home Office--Meridian
  • Registered: 2007-08-15
  • Posts: 334

Re: NWare 1.5.1 officially released

Sent Andy a note to update the site, which he will do Monday at the latest.

The help files are now about 25 megs in size, and are now much easier to read and understand.  Huge improvement in the last 12 months.

THANKS, Andy

Scott

Make it intuitive, never leave them guessing.

4 Reply by draudio

  • draudio
  • Member
  • Offline
  • From: Glendale, CA
  • Registered: 2007-09-18
  • Posts: 32

Re: NWare 1.5.1 officially released

The release notes call out a bug fix for reading Null characters from the serial port in Python. Does this fix also address writing Null characters to the serial port?

Thanks!

Dave

Thanks!

Dave

5 Reply by JoshM

  • JoshM
  • JoshM
  • Recording Engineer at Burnt Orange Studio
  • Offline
  • From: Meridian, MS
  • Registered: 2007-08-13
  • Posts: 1,498

Re: NWare 1.5.1 officially released

draudio wrote:

The release notes call out a bug fix for reading Null characters from the serial port in Python. Does this fix also address writing Null characters to the serial port?

Thanks!

Dave

Hi Dave!

The short answer is yes.

The slightly longer answer is that the handling of null characters being read and written to the serial port in Python and with the new Comms Processor works fine. If you have an installation where this has been problematic, I would encourage you to go ahead and update to NWare 1.5.2 and try it again.

Thanks!

-Josh

Josh Millward
Burnt Orange Studios

JoshM's Website