1 Topic by kjhyland

  • kjhyland
  • Member
  • Offline
  • Registered: 2007-09-14
  • Posts: 2

Topic: 3 and 4 way crossovers

A request-
Please replicate the functionality of the old MWare 3 and 4 way crossovers when you can.  The new crossover does not have the same functionality, and cannot perform the same functions.  Many of the new multiway speaker boxes have significant overlap between the low and mid drivers.  The NWare crossover does not allow for the adjustment of the "knee" for the mid drivers with differing overlaps like the old one did.
Thanks,  KH

2 Reply by Fergy

  • Fergy
  • MM Tech Support
  • Offline
  • From: The Home Office--Meridian
  • Registered: 2007-08-15
  • Posts: 334

Re: 3 and 4 way crossovers

We built the new x-over this way to simiplify the controls for the average user.  However, that doesn't mean you can't build up a x-over exactly as required for the speaker.  Use a combination of high and low pass filters.  You can look in the schematic tab of a current x-over to see how you would build one.  Once you have it exactly how you want it, add it to your user device list.

Scott

Make it intuitive, never leave them guessing.