Devices not appearing in the nware remote log

Network switches will "Shut" (turnoff) an Interface because it sees the "I'm a NION and here is everything important" multicast network packet as a broadcast storm.  A restart will cause the network switch to automatically change the Interface back to No-Shut.  These details are discussed in more depth in the Pandad Administrator Guide then is appropriate here.

http://peaveyoxford.com/kc/index.htm#3863

Next time you can't find the nControl, shut down Pandad as a Service and start Pandad Interactive Mode, then use remote_link to see if that clears the problem.  Again, more details on how this is done in the Guide.

Let us know the results.

Fergy