Device properties

CAB 4n Properties

Role assign

The role that this device belongs to. Devices in your design are allocated to roles (either manually, or automatically by NWare). Roles are then assigned to MediaMatrix hardware devices for processing during deployment.

You can manually assign a device to a role by clicking the button to change it to the button, and then selecting a role name in the list.

NWare will decide which role this device belongs to.

The user will specify a role manually.

Multiple devices have been selected for assignment to a role; some of the devices have already been assigned to a role manually and others have not.

Expansion Slot x

The types of cards inserted in the available slots at the rear of the unit.

Select the appropriate cards for the slots you are using. The CAB cards are color-coded to help you identify them.

Four channel line input

Black

Four channel mic input

Green

Four channel line output

Blue

Four channel AEC input

Orange

GPIO Pin 1-8

The assignments for the pins on the GPIO connector at the rear of the unit.

Digital Output

3.0V TTL logic

Low: 0VDC - 0.4VDC
High: 2.4VDC - 3.3VDC

Digital Input

3.0V TTL logic

Low: 0VDC - 0.8VDC
High: 2.0VDC - 24VDC

Analog Input

Using external, regulated 24VDC supply.

Rotary encoder

Requires 2 pins and a common.

Advanced properties

RS485 Raw MAC Enable

When selected, enables a raw, RS-485 MAC configuration to send and receive from non-CobraNet MACs.

ControlMatrix Mode

When selected, will set the baud rate and format defaults and add input wiring nodes to the block for serial bridging MACs when used with ControlMatrix.

Advanced Subchannel Mapping

When selected, NWare allows you to specify how the CobraNet input and output channels will be organized into bundles.